SIBAN has developed a cross stability rigid belt base for the construction of the Beltsiflex belts, necessary for the system performance optimisation. We can offer different constructions to suit the specifications of each installation.
The use of cross stability rigid belts offers significant advantages:
Provides better support on the return strand. Avoids the wear and tear of sidewalls and cleats.
Prevents the crowning of the carrying surface at deflection points.
Prevents the loss of driving power.
It is only possible to use a standard belt with no cross stability in small constructions without deflection points.
N NORMAL QUALITY
G GREASE AND OIL RESISTANT
S FLAME RESISTANT
HR HEAT RESISTANT UP TO 150 C
CROSS STABILITY RIGID FABRIC BELTS • TYPE XEM
Manuctured with fabric plies, they are produced using the same Beltsiflex® elevated belting systems technology. They provide greater stability than the commonly used EP fabrics (polyester - nylon) by adding to these one or two monofilament fabrics to achieve the rigidity most suitable for the belt’s characteristics.
CROSS STABILITY RIGID FABRIC BELTS TYPE EMXSC
Manufactured with fabric plies, they are produced using the same Belsiflex® XEM type technology but differ from this in that their rigidity is achieved by inserting one or two metal cords across the belt.
This type of belt is recommended when the rigidity needed is not satisfied by the XEM type. It is particularly indicated for the transportation of large productions and heavy duty applications requiring significant width dimensions.
CROSS STABILITY RIGID METAL BELTS TYPE XWXSC
This belt differs from type EMXSC in that it also incorporates metal cord tensioning along the belt and is used for the construction of big installations where the belt, not only supports high productions, but is also of large dimensions. The elongation values of this type of belts are nearly null.